3
PRODUCT DESCRIPTION
24
8011325/18IM/2020-07-02|SICK
O P E R A T I N G I N S T R U C T I O N S | ICR880/890
Subject to change without notice
3.1.2
Scope of delivery
Item
Component
Comments
1
ICD880 or ICD890 camera with
SD memory card
Model-dependent, depends on order
1
ICI890 illumination unit
Model-dependent, depends on order
1
Deflector mirror (optional)
Model-dependent, depends on order
4
180° mounting brackets with
mounting accessories
For camera system and deflector mirror
1
Connecting cable
For the voltage supply of the camera system
1
Connecting cable
For the voltage supply of the ICI890
illumination unit via the camera
1
Connecting cable
For the control of the illumination unit via the
camera
1
CAN data cable
For linking the camera system with the
controller unit via the CAN bus
1
Termination resistor
For the termination of the CAN bus on the
sides of the camera system
1
Device note, including the electrical
connection diagram for initial
information
Included in the device packaging for the
camera system
Tab. 4: Scope of delivery for the ICR880/890 camera system
The following items are also required to integrate the camera system:
Item
Component
Comments
1
Controller unit
(either an MSC800 or an SIC2000)
Model-dependent, without connecting cables
1
Sensor for determining the object
distance to auto-focus the camera
(with connecting cables and mounting
set)
Application-specific
1
Read cycle sensor (photoelectric
sensor) with connecting cable and
mounting set
Reading trigger
1
Incremental encoder with connecting
cable and mounting set
Used together with the trigger signal to
determine the position of the object on the
conveyor
1
Mounting frame
Optional (application-specific)
Tab. 5: Components for integrating the ICR880/890 camera system
Only use memory cards approved by SICK to ensure the reliable functioning of the
SD memory card.
Note
