SICK H18 - SureSense, Operating Instructions Manual

Page: 17 / 203

Table 10: % of sensing range
0 100
(3.94)
200
(7.87)
300
(11.81)
400
(15.75)
500
(19.67)
600
(23.62)
100
10
1
Operating reserve
Distance in mm (inch)
3 2
1
Figure 2: Redlight
0
1,000
100
10
1
Operating reserve
400
(15.75)
200
(7.87)
1,000
(39.37)
600
(23.62)
800
(31.50)
Distance in mm (inch)
3
2
1
Figure 3: Infraredlight
y
x
Figure 4: Description of the sensing range areas
3 Sensing range setting
Sensor which it is not possible to set: The sensor is adjusted and ready for operation.
Refer to graphic to check the function. If the switching output fails to behave in accordance
with graphic, check application conditions. See section Fault diagnosis.
Sensor with potentiometer:
The sensing range is adjusted relative to the background with the potentiometer (type:
270°).
Clockwise rotation: sensing range increased; counterclockwise rotation: sensing range
reduced.
Turn the potentiometer clockwise until the yellow LED indicator lights up. When an object is
moved into the path of the beam, the yellow LED indicator must go out. If the yellow LED
indicator remains lit when an object is moved into the path of the beam, repeat the adjust‐
ment.
COMMISSIONING
7
8017851.16K9 | SICK
Subject to change without notice
17