13
Technical data
NOTE
The technical data depend to some extent on the individual equipment of your device.
b
See the enclosed System Description for the configuration of your device.
13.1
System GM901-02
Table 21: Technical data, System GM901-02
Description
In-situ gas analyzer for emission monitoring and process measure‐
ment
Measured variable
CO
Maximum number of
measured variables
1
Measuring principles
Gas filter correlation
Measuring ranges
CO
500 ... 20 000 ppm (depending on the active measuring path and
gas temperature)
Precision
± 5% of the upper measuring range value
Process temperature
•
Up to 250 °C, standard
•
With extended calibration (recommended for process tempera‐
tures : ≤ +430 °C)
Process gas humidity
Non-condensing
Ambient temperature
–20 °C ... +55 °C
Conformities
•
TÜV type examination (Cross-Duct)
•
GPP measuring probe: U.S. EPA compliant
Electrical safety
EC
Degree of protection
IP 65 /NEMA 4
Dimensions (W x H x D)
367 mm x 418 mm x 1,414 mm (details see dimension drawings)
Installation
One fitting location on duct
Power supply
Supply voltage
115 V / 230 V
Power frequency
50 / 60 Hz
Max. power input
≤ 60 VA
Control functions
Manual span point test with gas-filled cell
13.2
Sender/receiver unit
Table 22: Technical data, sender/receiver unit
Dimensions
see "Dimension drawing, sender-receiver unit with GMP measuring
probe", page 94
Weight
6 kg
Lamp service life
Approx. 20 000 operating hours
13.3
Open GMP measuring probe
Table 23: Technical data, open GMPmeasuring probe
Description
Measuring probe in open design version with integrated
purge air guidance system
13
TECHNICAL DATA
90
O P E R A T I N G I N S T R U C T I O N S | GM901-02
8008932/16YT/V4-0/2022-02 | SICK
Subject to change without notice
