6.5.1
Correct connection of the CAN bus line
Figure 16: CAN bus line fitted correctly (shown on the AWE)
1
M screw fitting on the control unit
2
CAN bus line
3
CAN bus line shielding
4
M screw fitting fitted in the control unit
6.5.2
Connecting the control unit electrically
NOTE
The analog input assignment shown in the following Chapters is the factory setting.This setting may not be
changed.
ELECTRICAL INSTALLATION
6
8009389/147I/V4-0/2021-03 | SICK
O P E R A T I N G I N S T R U C T I O N S | GM35
35
Subject to change without notice