4
Transport and storage
4.1
Transport
NOTICE
Damage due to improper transport!
■
The product must be packaged with protection against shock and damp.
■
Recommendation: Use the original packaging.
■
Note the symbols on the packaging.
■
Do not remove packaging until immediately before you start mounting.
4.2
Unpacking
•
To protect the device against condensation, allow it to equilibrate with the ambient
temperature before unpacking if necessary.
•
Handle the device with care and protect it from mechanical damage.
•
To avoid ingress of dust and water, only remove the protective elements, e.g.
protective caps of the electrical connections just before attaching the connecting
cable.
4.3
Transport inspection
Immediately upon receipt in Goods-in, check the delivery for completeness and for any
damage that may have occurred in transit. In the case of transit damage that is visible
externally, proceed as follows:
•
Do not accept the delivery or only do so conditionally.
•
Note the scope of damage on the transport documents or on the transport compa‐
ny's delivery note.
•
File a complaint.
NOTE
Complaints regarding defects should be filed as soon as these are detected. Damage
claims are only valid before the applicable complaint deadlines.
4.4
Storage
•
Electrical connections are provided with a protective cap.
•
Do not store outdoors.
•
Store in a place protected from moisture and dust.
•
Recommendation: Use the original packaging.
•
To allow any residual dampness to evaporate, do not package in airtight contain‐
ers.
•
Do not expose to any aggressive substances.
•
Protect from sunlight.
•
Avoid mechanical shocks.
•
Storage temperature:
.
•
Relative humidity:
•
For storage periods of longer than 3 months, check the general condition of all
components and packaging on a regular basis.
4
TRANSPORT AND STORAGE
18
O P E R A T I N G I N S T R U C T I O N S | GLS621
8024289/1E1C/2022-09-09 | SICK
Subject to change without notice
