![background image](http://html1.mh-extra.com/html/sick/flexlock/flexlock_operating-instructions-manual_1264596034.webp)
10
Troubleshooting
10.1
LED indicators
Overview
1
2
3
STATUS
LOCK
DIAG
In combination, these LEDs indicate detailed status and error states.
Important information
DANGER
Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.
b
Immediately shut the machine down if the behavior of the machine cannot be
clearly identified.
b
Immediately put the machine out of operation if you cannot clearly identify or
allocate the fault and if you cannot safely remedy the fault.
b
Secure the machine so that it cannot switch on unintentionally.
LED indicators
In general, the STATUS and LOCK LEDs indicate the following states.
Table 9:
1
LED STATUS
Display
Status
Ö
Green
Valid actuator detected. OSSD LOW.
O
Green
Valid actuator detected. OSSD HIGH.
O
Red
No valid actuator detected. OSSD LOW.
Table 10:
2
LED LOCK
Display
Status
o
No active locking signal
Ö
Green
Locking signal active, locking function not locked.
O
Green
Locking signal active, locking function locked.
OÖ
Yellow
Error when closing or opening.
10
TROUBLESHOOTING
34
O P E R A T I N G I N S T R U C T I O N S | flexLock
8020562/2022-07-07 | SICK
Subject to change without notice