105
8011952/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER C200
Subject to change without notice
TROUBLESHOOTING
6
6.2
Sender/receiver unit
Malfunctions
Warning and error messages in SOPAS ET
Fig. 70: SOPAS ET menu: DH C200/Diagnosis/Error messages/Warnings
Current warning or error messages, or earlier messages stored in the error memory, can be
shown by selecting “actual” or “memory” in the “Error selection” or “Warnings selection”
window.
●
Display of error or warning: With LED symbol
●
Description of error or warning: In the description field of SOPAS ET
Malfunctions listed below can probably be cleared onsite.
Symptom
Possible cause
Action
●
LEDs of the
sender/receiver
are not on
●
No sender light
beam
●
No supply voltage
●
Connection line not connected correctly
or defective
●
Defective plug connector
▸
Check plug connectors and lines.
▸
Contact SICK Customer Service.
