SICK DOSIC Series, Operating Instructions Manual, Page: 44 / 58

OPERATING INSTRUCTIONS | DOSIC
®
8020955 /11HD/ 2018-12-12 | SICK AG
Subject to change without notice
44
10 TROUBLESHOOTING
10.2 Outputs
Error Cause Solution
Switching output
does not behave as
expected
Configuration incorrect. Perform configuration of the switching output
(see “7.3 Configuration of digital switching inputs
and switching outputs” ).
An error is pending; the sensor outputs are in the
safe state.
Remove the cause of the error.
Line break. Check cable.
Analog output does
not behave as
expected
Configuration incorrect. Configure the analog output
(see “7.4 Configuration of analog outputs” ).
An error is pending; the sensor outputs are in the
safe state.
Remove the cause of the error.
Line break. Check cable.