SICK deTem4 Core Ex, Operating Instructions Manual

Page: 61 / 68

14.5 Deflector mirrors
14.5.1 Function and use
Overview
Deflector mirrors can be used to shape the light path to secure hazardous points from
multiple sides using a single multiple light beam safety device.
Important information
DANGER
Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of non-
observance.
b
Only mount deflector mirrors to solid walls or machine components. The position
of the deflector mirrors must not change after alignment.
b
Do not use deflector mirrors if contamination, beading water, condensation, or
frost on the deflector mirrors is to be expected.
b
Make sure that the deflector mirrors are intact and free of scratches, contamina‐
tion, beading water, condensation, frost, etc. at all times.
Further topics
• "Mirror columns", page 61
14.5.2 Change in scanning range using deflector mirrors
NOTE
The use of deflector mirrors reduces the sensing range depending on the number of
deflector mirrors in the light path.
Table 25: Scanning range with and without 1, 2, or 3 deflector mirrors
Variant Scanning range Scanning range
with 1 deflector
mirror Scanning range
with 2 deflector
mirrors Scanning range
with 3 deflector
mirrors
Short scanning
range 15 m 13.5 m 12.2 m 11.1 m
Long scanning
range 70 m 63 m 57 m 51.8 m
14.5.3 Deflector mirror – ordering information
Table 26: Ordering information, deflector mirror
Part Type code Part number
Deflector mirror incl. mounting kit PNS75-008 1026647
14.6 Mirror columns
Table 27: Ordering information, mirror columns
Column
height Suitable for
number of
beams Suitable for
beam separa‐
tion Type code Part number
985 mm 2 500 mm PM3S96-00240020 1040619
1,185 mm 3 400 mm PM3S11-00330030 1040625
ACCESSORIES
14
8020453/14Q7/2020-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | deTem4 Core 61
Subject to change without notice