Safety
14
© SICK AG • Subject to change without notice • 8014868/YIF1/2020-10-19
Laser class 1
Distance sensors with a class 1 laser according to EN/IEC60825-1:2014
(identical laser class for issue EN/IEC 60825-1:2007) carry the following
warning label.
LASER APERTURE
EN/IEC 60825-1:2014
Complies with 21 CFR
1040.10 and 1040.11
except for deviations
pursuant to laser notice
No. 50, dated June 24, 2007
LASER
1
• Laser output aperture label,
→
• CAUTION LASER RADIATION
Laser class 1 product
• EN/IEC 60825-1:2014:
Complies with 21 CFR 1040.10
and 1040.11 except for tolerances
according to Laser Notice No. 50
dated 24/06/2007
Fig. 2: Warning symbol on sensor with class 1 laser
Laser class 1 product
Laser warning label position
The laser warning label is located on the right side of the housing.
Complies with 21 CFR
1040.10 and 1040.11
except for deviations
pursuant to laser notice
No. 50, dated June 24, 2007
EN/IEC 60825-1:2014
MAX. OUTPUT ≤ 250 mW
PULSELENGTH = 4ns
WAVELENGTH = 658nm
LASER APERTURE
Fig. 3: Laser warning label position
2.5
Operational safety and particular hazards
Please observe the safety notes and the warnings listed here and in other
chapters of these operating instructions to reduce the possibility of risks to
health and avoid dangerous situations.
