Chapter
2
Operating Instructions
CLV 490 Bar Code Scanner
2-4
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8 008 796/0000/25-06-2002
Safety information
2.5
Environmental information
The CLV is designed to cause minimum impact on the environment. It does not contain any
silicone-based materials and, therefore, does not represent any problems for paint sprayers
in paint shops, for example.
2.5.1
Power requirements
The power requirements depend on the variants:
•
The line scanner has a typical power consumption of 9 W and max. 16 W
•
The line scanner with oscillating mirror has a typical power consumption of 9 W and
max. 18 W
•
The line scanner equipped with an integrated heater has a typical power consumption
of 75 W and max. 90 W
•
The line scanner with oscillating mirror equipped with an integrated heater has a typical
power consumption of 75 W and max. 100 W
The values are given for devices with disconnected switching outputs.
2.5.2
Disposal after removal from service
Always dispose irreparable devices in a manner that is not harmful to the environment and
in accordance with the applicable national waste disposal regulations. The CLV can be se-
parated into recyclable secondary raw materials and special-category waste (electronic
scrap).
See also
Chapter 7.3 Disposal, Page 7-2
SICK AG currently does not accept delivery of unusable or irreparable devices.
