NOTE
If the bracket is mounted concealed on the device (option b), observe the follow‐
ing:
•
Use a suitable tool (e.g. slotted screwdriver) to turn the insert out of the fixing
hole of the bracket.
•
Mount the bracket to the machine or profile frame using an M6 countersunk
screw. Then slide the device onto the bracket.
2.
Mount the bracket with an M5 screw to a machine or profile frame. (
"
)
"
Torque: 2.5 Nm to 3 Nm
✓
The device is firmly mounted in the bracket.
Complementary information
Information on disassembly,
see "Mounting the swivel mount bracket", page 40
5.3.5
Mounting the swivel mount bracket
Overview
The sender and receiver are each mounted using 2 swivel mount brackets.
The swivel mount bracket consists of 2 individual parts, a swivel mount adapter and a
swivel mount port.
Approach
1.
Slide the swivel mount adapter onto the end cap of the device. (
!
)
5
MOUNTING
40
O P E R A T I N G I N S T R U C T I O N S | C4-RD
8025644/19Z2/2021-03-09 | SICK
Subject to change without notice
