O P E R AT I N G I N S T R U C T I O N S |
Bulkscan LMS511
8014829/ZNC5/2017-06-06 |
S I C K
Subject to change without notice
1 2
ON SAFETY
2.5
Environmental protection
The Bulkscan has been designed to minimize its impact on the environment. It con-
sumes only a minimum of energy.
At work, always act in an environmentally responsible manner. For this reason, please
note the following information on disposal.
2.5.1
Power consumption
• The Bulkscan consumes a maximum of 25 W in operation without output loads.
• If the operating temperature of the sensor drops below 5 °C, the Bulkscan switches
on the heating. The sensor then consumes a maximum of 90 W.
2.5.2
Disposal after final decommissioning
Always dispose of unusable or irreparable devices in accordance with the applicable
specific national waste disposal regulations.
Dispose of all electronic assemblies as hazardous waste. The electronic assemblies
are easy to dismantle.
SICK AG does not currently take back devices that are unusable or irreparable.
2.6
IP technology
SICK uses standard IP technology in its products. The emphasis is placed on availability
of products and services. SICK always assumes the following prerequisites:
• The
customer will ensured the integrity and confidentiality of the data and rights
affected by the use of the aforementioned products.
•
In all cases, appropriate security measures, such as network separation, firewalls,
virus protection, and patch management, is be taken by the customer on the basis of
the situation in question.
Note
