1
ABOUT THESE OPERATING INSTRUCTIONS
6
8017621/ZPQ5/2017-08-15|SICK
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | AOS502 STS
Subject to change without notice
1.3
Information depth
These supplementary operating instructions contain information about the AOS502 STS
system on the following topics:
•
Product description
•
Project planning
•
Mounting
•
Electrical installation
•
Commissioning
When planning and using the AOS502 STS system, technical skills are also required that
are not covered by this document.
The applicable official and legal regulations at the application site must always be
complied with when operating the system.
Further information about the device components used in the AOS502 STS can be found
in the accompanying operating instructions.
For carrying out the configuration and diagnostics of the AOS502 STS, you will need the
SOPAS
SICK Engineering Tool (configuration software for the laser scanners), version
V 3.0 or higher, and the
FSD Flexi Soft Designer
(configuration and diagnostic software
for the control), version 1.7 or higher. Both of these tools are included in the scope of
delivery.
1.4
Abbreviations used
Advanced object detection system
Flexi Soft Designer = software for Flexi Soft control for configuration and diagnostics
Laser scanner from SICK AG
SICK Engineering Tool = software for laser scanner configuration and diagnostics
Programmable logic controller
Ship-to-shore
Note
AOS
FSD
LMS
SOPAS
PLC
STS
