ELECTRICAL INSTALLATION
5
41
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
5.3
Connecting MDA Vision with customer network
Fig. 46: Connection to customer network
▸
Plug the RJ45 male connector of the Ethernet cable on the MDA Vision into the
Data
connection socket.
NOTE
The Ethernet cable is not included in the scope of delivery.
▸
Lead the cable to a free Ethernet female connector of the target network.
▸
Establish Ethernet connection with the target network.
5.4
Connecting mobile hand-held scanner (optional)
Fig. 47: Connecting mobile hand-held scanner (optional)
▸
Plug the plug connector of the cable coming out of the mobile hand-held scanner into
the
Aux Scanner
serial connection socket.
▸
Fix the plug connection with two screws.
Creating a
connection