13
Technical data
NOTE
The relevant online data sheet for your product, including technical data, dimensional
drawing, and connection diagrams can be downloaded, saved, and printed from the
Internet:
•
Please note: This documentation may contain further technical data.
13.1
Optics
Table 41: Laser/optics
Light sender
Laser diode, red light
Laser class
2 in accordance with EN 60825-1 / CDRH
CW modulation
± 0.85 Po sinusoidally modulated
Maximum peak output
≤ 1.9 mW
Pulse duration
6.8 ns
Average performance P
0
< 1 mW
Shaft Length
655 nm
Frequency
≥ 90 MHz
Light spot size
Typically 5 mm + (2 mm x distance [m])
Average service life
Typically 100,000 h at +25 °C ambient temperature
13.2
Performance data
Table 42: Performance data
Measuring ranges
•
DL100–21XXXXXX: 0.15 m … 100 m
•
DL100–22XXXXXX: 0.15 m … 200 m
•
DL100–23XXXXXX: 0.15 m … 300 m
Measuring object
On Diamond Grade reflective tape DG983
Measurement accuracy
•
DL100–21XXXXXX: ± 2.0 mm
•
DL100–22XXXXXX: ± 2.5 mm
•
DL100–23XXXXXX: ± 3.0 mm
Repeatability
2)
•
DL100–21XXXXXX: ± 0.50 mm
•
DL100–22XXXXXX: ± 1.00 mm
•
DL100–23XXXXXX: ± 2.00 mm
Measurement cycle time
1 ms
Response time/Measured
value age
2 ms
Output rate
6 ms
Initialization time
■
Typically 1.5 s
■
After reflector loss: < 40 ms
1)
The measurement accuracy can be up to ± 4 mm in the 150 mm...180 mm measuring range.
2)
Statistical error 1 σ, environmental conditions constant, minimum warm-up time 10 min.
13
TECHNICAL DATA
86
O P E R A T I N G I N S T R U C T I O N S | DL100 Pro PROFIBUS DP
8014755/19H8/2021-10-15 | SICK
Subject to change without notice
