SICK 6044629, Operating Instructions Manual

Page: 7 / 15

5 Mounting
DANGER
Mount the emergency stop pushbutton such that it can be reached easily!
The emergency stop pushbutton is intended to be mounted so it is vertical (connecting
cable down or up).
How to mount the emergency stop pushbutton ( see figure 1 ):
b
Mounting on profile rail: Insert sliding nut in profile (sliding nut not included).
Or
Wall mounting: Drill two mounting holes in the mounting plate.
b
Fasten retaining clip.
b
Fit housing to the side of the retaining spring, pull against spring pressure and
press on. The emergency stop pushbutton engages.
b
Press “RESET” cover onto reset button, with label correctly positioned so it is legi‐
ble, until it engages.
b
Connect connecting cable to the connection plug. Pay attention to the permissible
electrical and mechanical data (
see "Technical specifications", page 14 ):
Figure 1: Mounting of the emergency stop pushbutton (screws and sliding nut not included)
MOUNTING
5
8022342/2017-12-15 | SICK O P E R A T I N G I N S T R U C T I O N S | ES11 7
Subject to change without notice