11.4
Diagnostics using Safety Designer
The following diagnostics tools are available in the device window:
•
Data recorder
•
Event history
•
Message history
The following interfaces are suitable for diagnostics:
•
USB 2.0 mini-B (female connector)
6)
11.4.1
Data recorder
Overview
Figure 67: Data recorder
You can use the data recorder to record the device’s signals. Depending on the inter‐
face and the load on the interface, the measurement data may not be transmitted and
shown for every scan cycle.
The data is saved in a data recorder diagnostics file.
You can play the data recorder diagnostic file in the data recorder.
You can adjust the settings in the Safety Designer main window.
Table 20: Data recorder
Start recording
6)
The USB connection may only be used temporarily and only for configuration and diagnostics.
TROUBLESHOOTING
11
8023152/1G5N/2022-06-28 | SICK
O P E R A T I N G I N S T R U C T I O N S | outdoorScan3 Core I/O
125
Subject to change without notice
