ELECTRICAL INSTALLATION
5
59
8020776/12AX / 2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S |Free Flow Profiler
5.3.3
Connection to Ethernet switch
The Traffic Controller FPS that has been mounted inside the control cabinet must be
connected to the Ethernet switch. The Ethernet switch connects the three 2D LiDAR
sensors to the Traffic Controller FPS.
▸
Connect the
Ethernet 2
connection of the Traffic Controller FPS to the Ethernet switch.
Fig. 58: Electrical installation of the Traffic Controller FPS – Connection to the Ethernet switch
5.3.4
Connecting to the customer interface
Set up the client interface for TEMS Manager to enable the transfer of measurement
results and status messages.
▸
Connect the
Ethernet 1
connection of the Traffic Controller FPS to the Ethernet
connection of the relevant client.
Fig. 59: Electrical installation of the Traffic Controller FPS – Connecting the client interface to the
client
