INSTRUCTION MANUAL
· EN
SYNCRA SDC
· 6.0 · 7.0 · 9.0
COMPONENTS
SYNCRA SDC pumps are designed favoring the almost total dismantling of their components, to
facilitate proper use and maintenance and ensure a long life. Below is the list of the individual
parts and spare parts (Pic.B):
1.
Motor body completely submersible and insulated by epoxy resin;
2.
Rotor Kit with Impeller and bottom bearing
3.
Bottom Bearing ( Hook - accessory)
4.
O-Ring
5.
Anti-vibration Rubber Feet
6.
Turning Pre-Chamber
7.
Pre-filter Grid
8.
Threaded Hose fittings
9.
Remote control Controller with “T” cable
10.
AC-DC power adaptor with LED light
11.
Connector cable “T”
TECHNICAL DATA
6.0 (24 V)
7.0 (24 V)
9.0 (24 V)
Switching
power supply
INPUT:
100-240V
50/60Hz
OUTPUT:
24V DC
Q min - max
2000 - 5500 l/h
3000 - 7000 l/h
4000 - 9000 l/h
530 - 1450 US gph
800 - 1900 US gph
1000 - 2500 US gph
H min - max
1,0 - 3,5 m
2,0 - 5,0 m
2,6 - 7,0 m
3.5 - 11.5 ft
6.5 - 16.5 ft
8.5 - 23.0 ft
Watt min - max
10 - 40 W
20 - 65 W
30 - 95 W
Cable length
3,0 m +
10.0 ft +
1
2
3
4
5
6
7
8
8
External diameter 25mm
(1”) for flexible pipeinternal
diameter 25mm (1”)
External diameter 32mm (1” ¼)
for flexible pipe internal diameter
32mm (1” ¼)
Male threaded 1” GAS
Female threaded ring 1” 3⁄
8
GAS
Inlet grid with female
threaded 1” 3⁄
8
GAS
Male threaded 1” 3⁄
8
GAS
Male threaded 1” 3⁄
8
GAS
Female connector 1” GAS
Rigid pipe connector. External
diameter 25/26,5mm (1”)
Rigid pipe connector. External
diameter 32/33,5mm (1” ¼)
9
10
11
B
