Sicce Seachem Tidal 35, Owner'S Manual

Page: 6 / 72

3
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. Check that the current on the pump’s label matches the outlet current. The pump has
a differential switch (protector) through which the nominal current must be lower or
equal to 30 mA.
2. Never operate the pump without water to avoid damage to the pump motor.
3. Before plugging in the pump, check that the cord and pump are not damaged.
4. The pump has a type Z cable link. The cable and plug cannot be substituted or
repaired. In case of damage, replace the entire pump
5. CAUTION: disconnect all submerged electrical products before doing maintenance in
the water; in case the plug or electrical outlet is damaged, switch off the circuit breaker
before disconnecting the plug from the outlet.
6. The filter can be run in liquids or in any environment with a maximum temperature of
35°C/95° F.
7. Do not use the filter for purposes (i.e. in bathroom or similar applications) other than
for which it was designed for.
8. Avoid filter use with corrosive or abrasive liquids.
9. The filter has not been designed for use by children or mentally challenged individuals.
Appropriate adult supervision or persons responsible for personal safety is required.
10. Do not disconnect the filter from an electrical outlet by pulling the cord.
11. The filter can only be used in the above-mentioned applications and is only for indoor
use.
12. This appliance has no user serviceable parts.
INSTRUCTIONS FOR THE CORRECT DISPOSAL OF THE PRODUCT ACCORDING TO
EU DIRECTIVE 2002/96/EC
When used or broken, this product does not have to be disposed with other waste. It can
be delivered to specific electrical waste collection centers or to dealers who provide this
service. Disposal of electrical products separately avoids negative consequences for the
environment and for overall public health and allows the reuse of materials providing savings
of energy and resources.