B06 20 243 E-EN
page 9 / 23
09.2010
Installation and Maintenance Manual
CB8-E
4
Installation
4.1 Scope of supply
The scope of supply is set out in the shipping documents. Completeness must be verified upon
receipt. Any damage incurred in transit and/or missing parts must be reported immediately in writing.
The CB8-E brake is supplied ready to install.
4.2 Transport
When leaving the factory the brake is always packed in such a way to guarantee maximum security
during transport.
4.3 To be noted before installation
During installation comply with the safety directions in §2.
All work must be performed with care and with a focus on the safety aspect.
WARNING
Non-compliance with these directions can lead to malfunction of the brake.
WARNING
Safeguard the disc against inadvertent rotation!
4.4 Lifting and Handling
The CB8-E brake is to be handled with care. The weight of the brake is approx. 42 kg including
thrustor.
CAUTION
Ensure use of suitable lifting gear.
To avoid damaging component parts or paintwork do not place chains or wire around the
caliper when lifting.
In order not to damage any parts on the brake do not fit any hook, rope, chain or strap around
indicators, linings, etc.
