10
SYSTEM MENU
System menu is used to access system settings and functions.
SOUND MENU
Sound menu is used to change the sound setting
for measurement confirmation.
Select ON
to enable the measurement confirmation sound.
Select OFF
to disable sound for all functions except for the
Navigation Control operation.
Select R-TONE to enable a special mode when beep frequency varies
depending on the measured resistance value in the Resistance Mode
(see the Measurement Menu section). Resistance thresholds for the
R-TONE variations are preset to
• Higher than 20 Ohm
• 10 Ohm
• 5 Ohm
• Ohm
• 0.5 Ohm and lower.