21
Maintenance
一、
Normal phenomenon
Note: When softly touch the function button, the LCD has the relevant show, but the
machine is not working, it means the main machine maybe did not receive the signal, only
need touching the reset button and re-operation. It is the normal phenomenon.
The normal phenomenon as follows:
phenomenon
Reason
◆
After
unpacking
the
machine, there may be some
squash ball black stain on
the shooting wheel.
◆
It is left over by examination when ex-factory.
◆
When
starting
the
machine, the power light is
twinkling and dark .
◆
It is caused by the big pressure when suddenly starting the
machine.
◆
The
machine
is
not
working according to the
instruction of the remote
control.
◆
there is interfering signal nearby.
◆
the distance is far between the remote control and the main
machine.
◆
please pull out the antenna.
◆
The over-currency device
will protect the machine
sometimes when starting the
machine .
◆
It is caused by the big pressure when suddenly starting the
machine.
◆
When
touching,
the
remote control has no
response .
◆
the switch is not turned on .
◆
no battery.
◆
The battery electric quantity is low.
Warning▲
Do not allow minors to play with the machine.Do not stand in front of the
machine during working status to prevent people from getting hurt.