the machine could then also be set to the 2-line “narrow”, “among” or
“wide”.
Game (for events)
When there are many players at the court, for example during an event,
players could stand in a row on the court and everyone has to hit one ball.
Every player could play balls until he/she makes an error, then the player
goes again at the end of the row. The player that hits the last ball is the
winner.
1. Place the ball machine in the horizontal middle of the court
between the serviceline and the baseline. The position of the ball
machine depends on the level of the group. When closer to the
serviceline, the distance is getting smaller and so easier. When
closer to the baseline, the distance is getting bigger and so more
difficult.
2. Set the machine to “horizontal movement” and “vertical
movement” (3x “vertical” button). Change the speed so that all the
balls are inside the lines (normally about 70 km/h).
3. Let the first player begin and start the machine.
==> When some player is standing too long because his/her level is too
high, set the frequency higher so it will be much more difficult for the
player to hit good balls. When the group is so big (more than 10),
everyone could play only one ball, when the ball was good, the player is
going to the back of the row again. When the ball was fault, the player
goes to the side of the court and doesn't play anymore during this game.
The winner is the last one who hits a ball.
28