background image

 

- 3 - 

Before Using the Product

 

(Be sure to read this, and handle this product with due care.) 

To ensure correct use, read this operation manual thoroughly before handling 
this product. In addition, keep this manual in an easily accessible location. 

 

Install this product horizontally at a stable location. 

 

Be sure to connect the power cord grounding wire. 

 

This product is not explosion-proofed, so do not use it in the vicinity of combustible or 
flammable substances. 

 

[Modifications and Repairs Are Prohibited] Never disassemble or modify this product, as 
doing so will void the warranty with Sibata. Doing so may also result in unforeseen faults and 
accidents. 

 

If a fault occurs, request repairs immediately. Never leave the fault as is, or attempt your own 
repairs, as subsequent use may result in unforeseen accidents. 

 

If the product becomes dirty, wipe away the dirt with a soft cloth (soaked in detergent if there 
is significant dirt). 

 

If the product emits smoke, or the motor becomes very hot, or the product makes a strange 
noise, stop using it immediately. Turn OFF the power switch, remove the power plug from the 
power outlet, and request repairs. 

 

When removing the power plug from the outlet, hold the cord by the power plug to avoid 
pulling on the power cord. Be sure your hands are dry before handling the power cord. 
Otherwise, there is a risk of electric shocks. 

 

Do not bend, stretch, or twist the cord. Do not connect it to a different cord. 

 

If you notice that the cord has become damaged, or broken, or the plug does not connect 
properly, stop using it immediately, and request repairs.

 

 

 

Contents of Package

 

Check the package for the following items before using the product. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 Shelter for Andersen sampler    < Item code 080040-011 > 

 

Shelter (Suction pump, PVC hose

 

1m) ··································· 1 

 

Power cord ······································································ 1 

 

Operation manual (This document) ······································· 1 

 

Warranty ········································································· 1 

 

 Andersen Sampler AN-200    < Item code 080040-012 > 

 

Andersen Sampler AN-200 main unit ····································· 1 

 

Glass collection plate, 82.5 mm dia. ··························· 10 sheets 

 

Aluminum filter plate, t = 1.6, 82.5 mm dia. ··················· 8 sheets 

 

Stainless steel collection plate, t = 0.1, 80 mm dia. ········ 10 sheets 

 

Styrol sample holder ························································ 10 

 

Flowrate calibration table ···················································· 1 

 

Operation manual (This document) ······································· 1 

 

Warranty ········································································· 1 

 

 

Glass fiber filters, PTFE binding, TF98R, 80 mm dia., 100 sheets 

< Item code 080130-098080 > 

Andersen Sampler AN-200 Set    < Item code 080040-01 >

 

Summary of Contents for Andersen AN-200















Reviews: