siat SR4-S Type A, Instruction Manual And Spare Parts List

Page: 27 / 80

8-THEORY OF OPERATION
8.1 DESCRIPTION OF THE WORKING CYCLE
Fold manually the four lower flaps of the box.
Position the box, keeping the lower flaps folded, on the centering unit.
Keeping the box with the hands, make it advance until it presses the
lever. This will approach the side guides to the box.
The side guides block the box on the centering unit, so that it
can be filled without being hold with the hands.
8.3 HOW TO STOP THE MACHINE
8.3.1 NORMAL STOP PROCEDURE
When the main switch is turned OFF, the machine stops immediately at any point of the working cycle.
The same thing happens in case of electric black-out or when the machine is disconnected from the mains.
Air pressure remains ON.
8.3.2 EMERGENCY STOP
The lockable button for emergency stop is located on the infeed side of the top head.
(This part is not produced by the machine manufacturer. For its technical specifications see section
15-ENCLO-
SURES ).
After the filling fold the upper flaps and push the box against the
lever which will start the uplifting of the taping unit.
Let the box pass through the machine up to reach the lower driving
belts
8.2 OPERATING MODES
The case sealer Mod. SR4-S has only one automatic working mode,
with:
-The EMERGENCY STOP BUTTON unlocked
- The start button pushed ON
- Pneumatic circuit activated.
79 February 2007
ENGLISH