18
19
UTP Face
Note: Only 1 Bus IN and 1 Bus OUT
port can be used at any given time.
4. Connecting IP Control
SI�FI is intended to be treated as any other bus device, and plugged in to a motor port, the BUS IN port, or a
Somfy Data Hub� Regardless of which of these ports you plug the SI�FI in, your entire system will be controllable
over IP�
**SI�FI requires a separate cable connecting it to the IP network of the site**
UTP Face
3. Connecting BUS Devices
All motor ports on the UTP Face of Janus accept device inputs and can be used if the port is not needed for
a shade� Janus supports the use of 8 shades and 8 devices simultaneously if all motors are plugged in to the
Terminal Block Face while all devices are connected to the UTP Face�
