Gigabit-LAN
Controller
Marvell 88E8056 Ethernet network controller
With PCI Express interface
IEEE 802.3u 1000Base-T compliant
Supports 10 / 100 / 1.000 MBit/s operation
Supports Wake-on-LAN
IEEE1394 Firewire controller TI TSB43AB22A
Complies with 1394 OHCI specification revision 1.0
1x 6pin Firewire connector at the backpanel
Supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
3x internal (SATA) plus 3x external (eSATA)
1x IDE ATA 100 drives
1x floppy disk drive
Microphone
Headphone (Line-out)
2x USB 2.0
External Serial ATA Hotplug (eSATA)
Power button
Reset button
Power indicator (blue LED)
HDD indicator (orange LED)
HDMI (digital video out, DVI via adapter)
D-Sub VGA (analog video out)
4x USB 2.0, Firewire (6 pin), GigaBit LAN (RJ45)
2x External Serial ATA Hotplug (eSATA)
8-ch Audio line-out (2x rear/front, bass/center, surround/back)
Audio Line-in, Digital Audio: optical S/PDIF output
Clear CMOS button
Wireless LAN Antenna (Perforation for PN20)
PS/2 Mouse & Keyboard (Perforation for PS10)
Parallel port (Perforation for PC8)
6x USB 2.0 (three sets with 2x5 pins)
2x fan connectors (4 pins and 3 pins)
Headers for PS/2 mouse and PS/2 keyboard
Multilanguage XPC Installation Guide (En, De, Fr, Es, TC, Jp)
XPC 32/64bit Driver CDROM for Windows XP/Vista
Data cables: floppy, PATA, SATA, eSATA (PATA/SATA preinstalled)
HDMI-to-DVI-Adapter
Power Cord, Screws, Heatsink Compound
Firewire-
Controller
Drive
connectors
Front panel
connectors
Back panel
connectors
Other
connectors
Accessories
*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using
third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the
components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held
responsible for possible damage caused by overclocking.
**) Dynamic Overclocking Technology (D.O.C.)
This is the overclocking function in the BIOS Setup, which is designed to detect the load balance of CPU while
running programs, and to adjust the best CPU frequency automatically. When the mainboard detects CPU is
running programs, it will speed up CPU automatically to make the program run smoothly and faster. When the CPU
is temporarily suspending or staying in the low load balance, it will restore the default settings instead.
Page 5
3044 AP Rotterdam the Netherlands
Graafstroomstraat 75
DigiteQ B.V. h.o. Shuttleshop.COM
www.shuttleshop.com
Tel. +31 88 3088088
Fax +31 88 3088089
Optional
Back panel
connectors