English
Select Change User Password to give or to abandon password setting same as
Change Supervisor Password item above.
Note that Supervisor Password field allows users to enter and change the settings of
the BIOS SETUP UTILITY, while User Password field only allows users to enter the
BIOS SETUP UTILITY without having the authorization to make any change.
The Password Check item is used to specify the type of BIOS password protection
that is implemented. Password Settings are described below:
Setup
The password is required only when users try to access to
BIOS SETUP UTILITY.
To clear a set Supervisor Password/ User Password, just press [Enter] under Change
Supervisor Password/ Change User Password field when you are prompted to enter
the password. Please note that when Supervisor Password has been cleared, User
Password will be cleared as well. A message box will pop up confirming password will
be disabled. Once the password is disabled, the system will boot and user can enter
setup without entering password.
Boot
The password is required every time when power on.
Both
The password is required every time when power on.Also,
the password is required only when users try to access to
BIOS SETUP UTILITY.
Password Login control
Password Mode select.
The choice: Boot, Setup, Both
Flash Write Protection
Enabled/Disabled BIOS Write Protection control function.
The choice: Enabled , Disabled.
Secure Boot Control
Enabled/Disabled Secure Boot Control.
The choice: Enabled , Disabled.