17
English
4. Fasten the Smart Fan to the chassis with the four thumbscrews.
Memory Compatibility :
Install memory in any or all of the banks according to the
combinations shown below.
Note : 1. Maximum installable memory is 2GB.
2. Double-side X16 DDR-SDRAM chips are not supported.
3. Registered DIMMs are not supported.
4. Only unbuffered without ECC DIMM are supported.
5. Does not support X4 DDR-SDRAM.
Note : No jumper settings are required to configure memory.
The system BIOS utility automatically detects the memory settings.
Check the total installed system memory value in the BIOS menu.
TOTAL 2 DIMM in Single or Dual Channel Mode
up to 2GB and 1GB per DIMM
Density
256 Mbit
512 Mbit
1024 Mbit
Device Width
X8
X16
X8
X16
X8
X16
Single Side
256MB 128MB
512MB
256MB
1024MB
512MB
Double Side
512MB
N/A
1024MB
N/A
2048MB
N/A
<
2.3 DDR Installation
