HOT-183: Trio64V2 PCI VGA
12
Installing Windows NT 4.0 Display Drivers
1.
Start system with Windows NT 4.0 installed.
2.
IMPORTANT: When the “Please select the operating system to start...”
message is displayed, select “Windows NT Workstation Version 4.00
[VGA mode]”.
3.
From “Start”, select the “Settings group”, then click on the “Control
Panel” icon.
4.
In the “Control Panel”, double click on the “Display” icon.
5.
In the “Settings” screen, click on the “Display Type...” button.
6.
From the “Display Type” screen, and in the “Adapter Type” section,
click on the “Change...” button.
7.
In the “Change Display” screen, click on the “Have Disk...” button.
8.
Insert the new display driver diskette into the A:\ drive, then click on
the “OK” button.
9.
From the list of displayed S3 devices, select your S3 device.
10. From “Third-party Drivers”, click on the “Yes” button to proceed.
11. If a message appears stating the driver is already installed on the
system, and asks if you want to use the current or new drivers, be sure
to select the “New” button.
12. If prompted for the driver diskette a second time, click on the
“Continue” button.
13. When the message “The drivers were successfully installed” is
displayed, remove the display driver diskette, then click on the “OK”
button.
14. Back at the “Display Type” window, click on the “Close” button.
15. Back at the “Display Properties” window, click on the “Close” button.
16. When you see the “System Settings Change” window, asking if you
wish to restart your computer, click on the “Yes” window to reboot
now.
