- 40 -
3.3 System Memory Configuration
The MS50/MS50N mainboard has two 168-pin DIMM slots that allow you to
install from 16MB up to 2GB of system memory.
Each 168-pin DIMM (Dual In-line Memory Module) Slot can accommodate
16MB, 32MB, 64MB, 128MB, 256MB, and 512MB of PC100/PC133
compliant 3.3V single or double side 64-bit wide data path SDRAM modules.
1. Install Memory:
Install memory in any or all of the banks. The combination shown as follows.
Note: Maximum installed memory is 2GB.
Note:
You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
2. Upgrade Memory:
You can easily upgrade the system memory by inserting additional SDR
SDRAM modules in available DIMM banks. The total system memory is
calculated by simply adding up the memory in all DIMM banks After up-
grade, the new system memory value will automatically be computed and
displayed in the field "Standard CMOS Setup" of BIOS setup program.
DIMM Socket
Memory Modules
Module
Quantity
DIMM 1
16MB, 32MB, 64MB, 128MB, 256MB, 512M ,and 1GB
168-pin 3.3V SDRAM DIMM
x 1
DIMM 2
16MB, 32MB, 64MB, 128MB, 256MB, 512M ,and 1GB
168-pin 3.3V SDRAM DIMM
x 1
