manualshive.com logo in svg

Shuttle Spacewalker AK32, User Manual, Page: 5 / 89

Share
Download
Shuttle Spacewalker AK32 User Manual Download Page 5

- 3 -

Other Connectors

ATX Power Supply Connector (JP6) ....................................................... 39

Cooling FAN Connectors for CPU FANs (FAN1),  AGP (FAN2), SYSTEM
(FAN3), or North Bridge Fan (FAN4) ....................................................... 40

SIR/CIR Connector (JP2) ........................................................................ 41

Wake-On-LAN Connector (CN1) ............................................................. 41

Audio Connector CD_In (CN2) (Black) ................................................... 42

Audio Connector AUX_In (CN3) (White) ................................................. 42

Audio Connector TAD_In (CN4) (Green) ................................................. 42

3.3 SYSTEM MEMORY CONFIGURATION ...................................................... 43

Install Memory ......................................................................................... 43

Upgrade Memory ................................................................................... 43

4 SOFTWARE UTILITY .......................................................................44

4.1  Mainboard CD Overview .......................................................................... 44

4.2  Install VIA 4 in 1 Driver ............................................................................. 45

4.3  Install Audio Device Software .................................................................. 46

4.4  Install LAN Software ................................................................................. 47

Install WIN98 LAN drivers ....................................................................... 47

Install WIN2000 LAN drivers ................................................................... 50

Install WINNT LAN drivers ....................................................................... 54

4.5  View the User's Manual ............................................................................ 56

Summary of Contents for Spacewalker AK32


























































































Reviews:

No comments