Shuttle SDD-470, Service Manual

Page: 4 / 32

DISASSEMBLY INSTRUCTIONS
1.Mounting Box: Slide out the mounting box in parallel.
2.Top cover: Release screw at the back of top cover, and pull
out the cover.
3. Bottom Cover: Turn over the unit to release the screws at the back
of bottom cover and one the top surface. Pull out the cover.
4. Disassemble the Panel:
Pull out the Front panel.
Release the left side and right side screws attached to with the base.
Pull the base out of the unit.
5. Disassemble the mechanism deck:
There are two screws to lock the mechanism deck at front ,Unscrew
both of them.
Remove the solder from fixed wires on the main, and remove the deck.
6. Disassemble the key board :
Release four screws .
Remove the back panel .
Then remove the key board.
7.Unscrew the left side bracket and the right side bracket. There are
two screw on each side.
8. Disassemble the main board :
9.Unscrew two screw at the leef bracket
remove the solder from the Tuner,and main board.
Uncrew two screw ar the ANT.Remove the solder from fixed wires.
Unscrew two crew at the Heatsink.
Remove the main board.
03