8
-
STEP 4-4
Screw the XPC 802.11b/g
Wireless Kit to the two
holes on the upside of the
chassis arm, near the
rear of the XPC.
Caution :
When inserting the cable connector,
check the socket alignment and only
push horizontally.
Do not
turn or twist the cable.
-
STEP 4-6
Use a lock to secure the
antenna from the outside.
Refer to Step5 (Page11).
-
STEP 4-5
Install the antenna cable connector through the side reserve hole into the
back chassis.
Note :
If some difficulty is found while insert-
ing the antenna socket into the reserve
hole, make sure the surface is clean.
Finally, check the alignment and then
use some more force .
Antenna cable connector
