Shuttle MiniPress, Owner'S Manual

Page: 12 / 39

Maintenance and Cleaning
The MiniPress is easy to keep clean and requires only a limited amount of maintenance. Mild
soap and water, or antibacterial wipes are safe cleaning products.
Removing the Carriage - To remove the Carriage from the rails remove the two clips from one
side of the carriage using a phillips head screwdriver. Then lift one side of the Carriage up over
the side of the rail. The carriage will slip off easily. To install the Carriage, reverse the process.
During normal use, the carriage will be held on the rails by the two clips extending under each
rail.
Cleaning the Carriage and Frame - Once the Carriage is removed, both the Frame and
Carriage may be washed with mild soap and water. Prolonged exposure to water can rust the
bearings in the wheels attached to the Carriage, so do not immerse the Carriage or Frame in
water. Lubrication of the wheels and track can be done using Tri-Flow® or WD-40
® for smooth
operation.
Cleaning the Footplate - The surface of the Footplate can be washed with disinfecting wipes
or mild soap and damp cloth.
Page 12