background image

Kiosk K15 Series

 

互動式資訊服務站

Quick Start Guide  

快速啓用指南

Copyright © 2021, Shuttle Corporation. All Rights Reserved

Package Contents

  包裝內容物

Opening / Closing the Kiosk  打開 / 關閉 Kiosk

For safety reasons, please ensure that the power cord is disconnected before opening the  

case. Do not attempt to open the system unless by authorized qualified personnel.

基於安全考量

打開機箱時

請先拔除電源線。切勿自行打開機箱

必需經授權的專業人員方能打開機箱。

!

1. Insert the key into the lockhole at the rear case and turn it clockwise to open the front panel.

將鑰匙插入機箱後背蓋上的鎖孔, 然後順時針旋轉以打開前面板。

1.  Power switch 

電源開關按鈕

2.  Rear case 

後背蓋

3.  Connector for wifi antennas  

Wifi 天線連接埠

4.  Cable hole 

集線孔

5.  Thermal vent 

散熱孔

11.   Speakers 

揚聲器

12.  IC card reader  

IC 晶片讀卡機

13.  Barcode scanner 

 條碼掃描器

14.  NFC RFID reader 

感應讀卡機

15.  Counter mount (optional) 

台面安裝 (選配)

  6.  Webcam 

網路攝影機

  7.  15” Touch display 

15” 觸控顯示器

  8.  Release button 

釋放按鈕 

  9.  Receipt printer 

明細印表機

10.  Front panel’s lockhole 

前面板鎖孔

Changing the Thermal Roll Paper  更換熱感卷紙

2.  Close the front panel in reverse order avnd remove the key.

關閉前面板並用鑰匙以反方向上鎖, 並拔下鑰匙。

Front panel 

前面板

a

d

b

c

Unlock

解鎖

Lockhole

鎖孔

Rear case  

後背蓋

Clockwise

順時針

a

Lockhole

鎖孔

Front panel 

前面板

b

c

Lock

上鎖

Counter- 

clockwise

逆時針

d

Do not touch the print head thermal elements. The print head becomes very hot just after  

printing and is very dangerous. Be sure to allow the print head to cool down (after printing)  

before cleaning it. Also, be sure to turn off the rinter power before cleaning the print head.

請勿觸摸列印頭的熱感元件。在經過列印之後, 列印頭變得非常的熱且十分危險。在您要進行清潔之前, 

 

請確認給它一段時間讓它溫度降下來。另外, 在進行清潔之前也一定要確認將印表機的電源關閉。

!

1. As shown, use the key to push the release button to open the printer cover.

如圖所示, 使用鑰匙按下釋放按鈕, 以打開印表機門蓋。

2.  Remove the used paper roll from the paper tray and load the new paper roll. 

Make sure that a few inches of the paper is extended over the cover edge.

移除紙匣上剩餘的紙捲並裝入新的紙捲。請預留幾英吋的紙張, 讓它延伸出來到上蓋的邊緣。

3.  Close the printer cover. Tear the excess paper across the tear bar.

關上印表機門蓋, 撕掉多餘外露的紙張。

The product’s colour and specifications may vary from the actually shipping product. 

Should any accessories be required, please contact Shuttle or your relevant supplier.

出貨機種顏色及規格配備, 以實際出貨機種為準。如果需要任何配件, 請直接洽詢 Shuttle 或當地供應商。

i

Kiosk K15WL01 / K15RK01 (x1)

Wi-Fi Antenna (x1)   Wi-Fi 

天線

 (x1)

Roll Paper Partition (x1)

紙捲隔板

 (x1)

Magnetic Keychain (x1)

磁鐵鑰匙圈

 (x1)

The key to the case rear door. (x2)

機箱後背門的鑰匙 (x2)

The key to the printer cover. (x3)

印表機蓋的鑰匙 (x3)

  58mm thermal paper partition installation. 

Paper roll width 80mm / 58mm selectable.

  58mm 熱感紙捲隔板安裝。

 

  紙捲寬度可選擇 80mm / 58mm。

58mm paper roll only

僅適用於 58mm 紙捲

Make sure the paper roll  

is loaded in the direction.

請確認您的紙卷是以

 

正確的方向置入。

Release button

釋放按鈕 

b

a

SC

AN

SCA

N

c

d

Cut the paper neatly.

平整地切齊紙面

e

SCA

N

2

3

4

5

7

6

8

9

10

11

12

13

14

11

5

1

15

Product Overview     產品外觀

Reviews: