- 39 -
Used MEM base addr
This item is used to select a base address for the memory area used by any peripheral that
requires high memory.
The choices are
C800, CC00, D000, D400, D800, DC00
and
N/A.
Assign IRQ for USB
This item allows the user to assign IRQ to on-board USB controller or not.
Since on-board controller is enabled always, if none of IRQ is assigned to it, there will be
a question mark report on system device under windows 95.
PCI Latency Timer
The number of clocks programed in the PCI Latency Timer represents the guaranteed
time slice allocated to the 440LX, after which it must complete the current data transfer
phase and surrender the bus as soon as its bus grant is removed.
The PCI Latency Timer is used to guarantee to the PCI agents a minimum amount of the
system resource.
The default setting is 64 PCI clocks.
MS IRQ Routing Table
This item allows the user to set BIOS IRQ Routing Table Enabled or Disabled.
