16-Bit PnP Sound Pro
8
Windows 3.1/DOS Software Installation
The OPTi931 installation program (SETUP.EXE) will install all of the Windows 3.1 and
DOS software drivers and application needed to achieve both Sound Blaster Pro and
Windows Sound System compatible operation.
Device Driver Installation
The following steps will guide you through the full software installation and configuration
for the OPTi931. We recommend that you read through them now, and become familiar
with them before installing the software.
1
Insert the OPTi931 drivers and utilities disk in your floppy drive.
2
Entering Windows and select
File
and
Run
.
3
Type
a:\setup
and click
OK
as shown.
4
The OPTi931 menu driven installation program will copy the installation files to
your hard drive.
5
After the install files are copied, the installation program will start.
It is strongly recommended that you exit all Windows programs before running this
Setup Program.
