Shuttle FV25 User Manual Download Page 46

Page: 46 / 81

- 44 -

4.3 Install VIA Hardware Monitor and LAN drivers

Insert the attached CD into your CD-ROM drive, and the CD AutoRun screen

should appear. If the AutoRun screen does not appear, double click on Autorun

icon in

My Computer

to bring up

Shuttle Mainboard Software Setup

screen.

Select the item using your pointing device (e.g. mouse) on the

Install VIA

Hardware Monitor

bar to install VIA Hardware Monitor driver .

Once you make your selection, a Setup window will automatically runs the

installation.

When the files are done copying, make sure you

reboot

the system to insure

that the files are installed correctly.

Note: When Install LAN driver, please confirm your OS and correctly

install driver. If your OS is win 9X/NT, please take the following

chapt description "Install LAN Software" for reference. The other

OS such as win 2000/XP/ME can be automatical installed

Then click on the

LAN Driver Installation

bar to install LAN driver.

Summary of Contents for FV25


















































































Search results

Summary of Contents for FV25

Reviews:

Related manuals for FV25

Brands by name

Popular brands

Shuttle FV25, User Manual

Search results

Summary of Contents for FV25

Reviews:

Related manuals for FV25

Brands by name

Popular brands