Shuttle FS51 User Manual Download Page 67

Page: 67 / 77

- 65 -

Power Management Setup

The Power Management Setup allows you to configure your system to
most effectively saving energy while operating in a manner consistent
with your own style of computer use.

ACPI Function

This item allows you to enable/disable the Advanced Configuration and
Power Management (ACPI)

The choice: Enabled or Disabled.

ACPI Suspend Type

This item allows you to select sleep state when suspend.

The choice: S1(POS), S3(STR), or S1 & S3.

Power Management Suspend Mode

This item allows you to decide the timing to enter suspend mode.

The choice: User Define, Min Saving, Max Saving.

Video Off Option

When enabled, this feature allows the VGA adapter to operate in a
power saving mode.
Always On

Always On

Monitor will remain on during power saving
mode.

Suspend --> Off

Monitor is blanked when the system enters
the Suspend mode.

Susp,Stby --> Off

Monitor is blanked when the system enters
either Suspend or Standby modes.

All Modes --> Off

Monitor is blanked when the system enters
any power saving mode.

The choice: Always On, Suspend ->Off, Susp,stby -> Off, or All
Modes -> Off.

Summary of Contents for FS51














































































Search results

Summary of Contents for FS51

Reviews:

Related manuals for FS51

Brands by name

Popular brands

Shuttle FS51, User Manual

Search results

Summary of Contents for FS51

Reviews:

Related manuals for FS51

Brands by name

Popular brands