- 38 -
3.3 System Memory Configuration
The FN85 mainboard has two 184-pin DIMM slots that allow you to install
from 64MB up to 2GB of system memory. Each 184-pin DIMM (Dual In-line
Memory Module) Slot can accommodate 64MB, 128MB, 256MB, 512MB,
and 1GB of PC2100, PC2700 or PC3200 compliant 2.6V single (1 Bank) or
double (2 Bank) side 64-bit wide data path DDR SDRAM modules.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
Note: Total 2 DIMM up to 2GB max and 1GB per DIMM
Note: You do not need to set any jumper to configure memory since the BIOS utility
can detect the system memory automatically. You can check the total system
memory value in the BIOS Standard CMOS Setup menu.
Don't support double-sided X16 DDR DIMMs.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR SDRAM
modules in available DIMM slots. The total system memory is calculated by
simply adding up the memory in all DIMM slots. After upgrade, the new system
memory value will automatically be computed and displayed in the field " Stan-
dard CMOS Setup" of BIOS setup program.
Density
64Mbit
128Mbit
256Mbit
512Mbit
Device Width
x8
x16
x8
x16
x8
x16
x8
x16
Single/Double
SS/DS
SS
SS/DS
SS
SS/DS
SS
SS/DS
SS
184pin DDR
DIMMs
64/128MB
64/128MB
128/256MB 128/256MB 256/512MB 256/512MB 512/1024MB 512MB/NA
