background image

3

English

AMIBIOS has been integrated into many motherboards for over a decade. In the past, 

people often referred to the AMIBIOS setup menu as BIOS, BIOS setup, or CMOS 

setup.

American Megatrends refers to this setup as BIOS. Specifically, it is the name of the 

AMIBIOS8 BIOS setup utility. This chapter describes the basic navigation of the BIOS 

setup screens.

Enter the BIOS

To enter the BIOS setup screens, follow the steps below:

Step1.  Power on the motherboard.

Step2.  Press the <Delete> key on your keyboard when you see the following  

 

text prompt: 

Press DEL to run Setup.

Step3.  After you press the <Delete> key, the main BIOS setup menu displays. 

 

You can access the other setup screens from the main BIOS setup menu, 

 

such as the Chipset and Power menus.

Appendix

The  main BIOS setup menu is the first screen that you can navigate. Each main 

BIOS setup menu option is described in this user’s guide.
The Main BIOS setup menu screen has two main frames. The left frame displays all 

the options that can be configured. “Grayed-out” options cannot be configured. 

 

Options is blue can be.
The right frame displays the key legend. Above the key legend is an area reserved for 

a text message. When an option is selected in the left frame, it is highlighted in white.
Often a text message will accompany it.

This manual describes the standard look of the BIOS setup screen.  

The motherboard manufacturer has the ability to change any and all of the 

settings described in this manual. This means that some of the options 

described in this manual do not exist in your motherboard's AMIBIOS.

In most cases, the <Delete> key is used to invoke the BIOS setup screen. 

There are a few cases that other keys are used, such as <F1>,<F2>, and 

so on.

Starting BIOS

BIOS Setup Menu

Summary of Contents for DH310 Series
























Reviews: