- 59 -
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or
multiple sector read/write. If your IDE hard drive supports block mode
(most new drives do), select Enabled for automatic detection of the
optimal number of block read/writes per sector the drive can support.
The choice: Enabled, Disabled.
POWER ON Function
This item is used to defined Keyboard & PS/2 mouse power-on func-
tion enabled or disabled.
The choice: Password, Hot KEY, Mouse Left, Mouse Right, Button
Only, keyboard 98.
Note:1. When item of PS/2 Mouse or HOT-Key is selected, please
also adjust jumper JP38 to the proper position.
2. USB keyboard, USB Mouse and Serial Mouse are not
supported to this function.
KB Power On Password
Power-on by soft-on/off.
The choice: Enter.
Hot Key Power ON
Power-on by soft-on/off button and keyboard are available.
The choice: <Ctrl><F1> to <Ctrl><F12>.
KBC Input Clock
This item to set the input clock to onboard keyboard controller.
The choice: 6MHz, 8MHz, 12MHz, 16MHz.
Onboard FDC Controller
This item specifies onboard floppy disk drive controller. This setting
allows you to connect your floppy disk drives to the onboard floppy
connector. Choose the "
Disabled
" settings if you have a separate
control card.
The choice: Enabled, Disabled.
