- 36 -
ATX Power Connector
Locate the 20-pin male header ATX power connector (ATX PWR) on your
mainboard. Plug the power cable from the ATX power supply unit directly
into ATX PWR ATX power supply connector.
Note 1 :
The ATX power connector is directional and will not go in unless
the guides match perfectly. Make sure that pin#1 is properly
positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place
to ensure a solid attachment.
Note 3:
Your ATX power supply must be supplied to ACPI +5V standby
power and at least 720mA compatible.
Note 4:
Make sure your power supply have enough power for higher
speed processor installed.
CPU Fan and Housing Fan Connector (CPU FAN, FAN2)
This mainboard provides two onboard 12V cooling fan power connectors to
support CPU (CPU FAN), Housing Fan (FAN2) cooling fans.
E1
E2~E3
Note:
Both cable wiring and type of plug may vary depending on the
fan maker. Keep in mind that the red wire should always be
connected to the 12V header and the black wire to the ground
(GND) header.
+12
GND
SENSE
CPU FAN
FAN2
