![background image](http://html1.mh-extra.com/html/shure/wfr-1d/wfr-1d_user-manual_1262309002.webp)
Net Weight
7.8 grams (0.28 oz), less cable and connector
Certification
Conforms to European Union directives, eligible to
bear CE marking; meets European Union EMC Immu-
nity Requirements (EN 50 082–1, 1992); RF radiated
(IEC 801–3); ESD (IEC 801–2); EFT (IEC 801–4).
SHIELD
RED
BLACK
CARTRIDGE
CONNECTOR
RED CODED TERMINAL
YELLOW
1
3
2
INTERNAL CONNECTIONS
FIGURE 3
INSTALLATION
CABLE ANCHORING
FIGURE 4
Tie Clasp Assembly
Insert the SM11 in the tie clasp and anchor the cable
as shown in Figure 4. Affix the clasp to a tie, shirt, or
blouse. Note that the microphone can be swiveled 360
_
in its holder for left, right, or vertical (“pen clip”) use.
Tie Tack Assembly
Remove the clutch from the tie tack assembly and insert
the tie tack holder in the tie (or through the tie and shirt if de-
sired). Affix the clutch to the pin of the tie tack holder. Insert
the SM11 in the tie tack holder.
Connector and Belt Clip
With the SM11 installed in one of the assemblies de-
scribed above, insert the connector in the connector belt clip
and fasten the belt clip to the user’s belt, waistband or other
clothing. Excess microphone cable can be inserted in the
user’s pocket or tucked into the waistband.
ARCHITECTS’ SPECIFICATIONS
The microphone shall be a moving–coil (dynamic) type
with a frequency response of 50 to 15,000 Hz. The micro-
phone shall have an omnidirectional polar characteristic.
The microphone shall be low impedance with a rated imped-
ance of 150 ohms for connection to microphone inputs rated
at 19 to 300 ohms. The microphone output shall be –64 dB
where 0 dB = 1 milliwatt per 10 microbars.
The microphone shall be a lavalier type, and shall be pro-
vided with a 1.2m (48 in.) non–detachable, two–conductor,
shielded cable with a professional, three–pin audio connec-
tor designed to mate with Cannon XL series, Switchcraft A3
(Q.G.) series or equivalent connectors. The microphone
shall also be provided with a tie clasp assembly, tie tack as-
sembly, connector belt clip, and carrying/storage bag.
The overall dimensions of the microphone shall be 33.5
mm (1 – 5/16 in.) in length and 14.7 mm (9/16 in.) in diame-
ter.
The microphone shall be the Shure Model SM11 or
equivalent.
ACCESSORIES AND REPLACEMENT PARTS
The following furnished accessories and replacement
parts can be ordered through your Authorized Shure Profes-
sional Products Dealer or from Shure Brothers Inc.
Tie Clasp Assembly
RK203TC
. . . . . . . . . . . . . . . . . . . . . . .
Tie Tack Assembly
90A2384
. . . . . . . . . . . . . . . . . . . . . . . . .
Connector Belt Clip
RK200BC
. . . . . . . . . . . . . . . . . . . . . . . .
Carrying/Storage Bag
26A13
. . . . . . . . . . . . . . . . . . . . . . . . .
Cartridge
R99
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cable
C91
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instrument Mounting Kit
RK279
. . . . . . . . . . . . . . . . . . . . . . .
For additional service or parts information, please con-
tact Shure’s Service Department at 1–800–516–2525. Out-
side the United States, please contact your authorized
Shure Service Center.
The Sound of Professionals...Worldwide
R
Shure Brothers Incorporated
222 Hartrey Avenue, Evanston IL 60202-3696