![background image](http://html1.mh-extra.com/html/shure/vp83f/vp83f_user-manual_1262295004.webp)
Shure Incorporated
4/21
•
•
•
•
Accessories
Foam windscreen
3.5 mm coiled audio cable
(2) AA batteries (except in Argentina)
Rycote Windjammer (optional)
Installing the Memory Card and Batteries
The VP83F requires two AA batteries to operate (compatible with Alkaline, NiMH, or Lithium). Installing a MicroSD memory
card enables recording functionality.
Audio is still passed through to the camera and headphone outputs if there is no memory card installed.
①
Opening the front panel
Squeeze the latches on each side and open the front panel to access the memory card and battery compartment.
②
Installing the memory card
Always turn the power off before removing or installing a memory card.
To Install:
Insert the card into the slot located above the battery door, with the contacts facing up. When fully inserted, the
card locks into place.
To Remove:
Press the card to unlock it, then pull it from the device.
Note:
Format the memory card in the device prior to first use. Refer to the memory card requirements section in the user guide for additional information.
③
Installing and replacing batteries
®
™
Summary of Contents for VP83F
Page 19: ...Shure Incorporated 19 21...