5
Recommend Gain Settings
Use the following chart as a guideline for setting gain based on cable type
where the distance from the antenna to the transmitter is greater than 100
feet.
NOTE:
For installations where the antenna is less than 75 feet from the
transmitter, lower the gain setting one step.
Cable Length
Gain Setting (based on cable type)
RG58*
RG8X
RG213/
RG8
Low-loss
RG8/
RG213**
10' (3 m)
0
0
0
0
25' (8 m)
+6*
0
0
0
50' (15 m)
*
+6
+6
0
100' (30 m)
*
+12
+6
+6
* RG58 cable has high signal loss and is not recommended for cable
runs greater than 10 feet
** Low-loss RG8/RG213 cables include Times Microwave Systems
LMR400 and Belden 9913 or 7810A
Find More Information Online
For more information, visit http://www.shure.com
Specifications
Connector Type
BNC, Female
Impedance
50 Ω
Power Requirements
10 to 15 V DC bias from coaxial connection, 75 mA
RF Frequency Range
174–216 MHz
Reception Pattern
3 dB Beam Width
120 degrees
Third-order Overload Intercept Point (OIP3)
>30 dBm
Antenna Gain
On Axis
3 dBi
Signal Gain
±1 dB, Switchable
+12 dB +6 dB 0 dB −6 dB
RF Overload LED Threshold
−5 dBm
RF overload LED does not operate for passive gain settings
Dimensions
559 x 435 x 68 mm (H x W x D)
Net Weight
765 g (27.0 oz.)
Operating Temperature Range
−18°C (0°F) to 63°C (145°F)
Storage Temperature Range
−29°C (-20°F) to 74°C (165°F)
Certifications
This product meets the Essential Requirements of all relevant European
directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/
europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: [email protected]
Summary of Contents for ua874V
Page 5: ......
