Shure Incorporated
4/10
Securing the antenna to the mounting plate
Routing the Cable
The output connector can be routed through ports
1
or
2
on the antenna. When connecting to an RF cable in the
wall, run the cable through the opening in the mounting plate.
Rotating the Cover
The cover can be detached and rotated in any direction for a matched appearance when using multiple antennas.
1. Remove the screws holding the cover in place from the back of the antenna
2. Remove the cover and rotate to the desired position
3. Replace the screws to secure the cover
Painting the Antenna
The cover of the antenna can be painted to match the installation environment. Use the following guidelines when
painting the antenna cover:
•
Remove the antenna cover before painting
•
Only use non-metallic paint, as any metallic content may interfere with RF reception
•
Allow the paint to dry completely before reinstalling the cover
